그 외의 디자인 기술들(Additional Design Techniques)

7. 참고 문헌 (Reference)

1) Montrose, M. 1999.
   EMC and the Printed circiut Board-Design, Theory and Layout Made Simple. Piscataway, NJ:IEEE Press.
2) Montrose, M. 1998. "Time and Frequency Domain Analysis for Right Angle Corners on Printed Circiut Board Traces.
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, New York: IEEE, pp.551~556.
3) Edwards. T. C. 1983.
   Foundations for Microstrip Circiut Design. New York: John Wiley and Sons.
4) Johnson, H.W., and M.Graham. 1993.
   High Speed Digital Design. Englewood Cliffs, NJ: Prentice Hall.
5) Parker, Carole. 1998. "Specifying a Ferrite for EMI Suppression." ITEM, R&B Enterprises. p.50
6) Das, S.K., and T. Roy. 1998. "An Investigation on Radiated Emission from Heatsink.
   Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, New York: IEEE, pp.784~789.
7) Product safety standard,
   Information Technology Equipment, Including Electrical Business Equipment. Oublished under the following international numbers: Underwriters Laboratories (UL 1950), Canadian Standards Associate (CSA C22.2 No. 950), Internaltional Electrotechnical Commission (IEC 950/IEC 61950), and European Normalized Standard (EN 60950).
8) Coombs, C. 1997.
  Printed Circuit Hanbook. 4th ed. New York: McGraw-Hill
9) IPC-D-275. 1991. Semtember.
  Design Standard for Rigid Printed Boards snd Rigid Printed Board Assemblies. Institute for Interconnecting and Electronic Circuits.
10) Reference Data for Engineers, 6th ed., ITT, July 1981.

Old - 1'st Edition
1) Parker, C.U. 1992. Choosing a Ferrite for the Suppression of EMI. Fair-Rite Products, Inc.
2) 1990.
   Design Guidelines for PCB Layout. CKC Laboratorries.


기술 정보 << 그 외의 디자인 기술들
<<  6. 필름